Beper 40.401 Manuel D'instructions page 9

Hair Dryer Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
USE ADVICE
Use the appliance only for the purpose for which it has been manufactured and do not use it with
wig or animal hairs or objects.
The air flow inlet and intake must never be blocked.
Keep your hair away from the airflow inlet. Do not use near to tissue or similar.
Keep away from children if they are not under adult close supervision.
Make sure the appliance is not getting wet and do not use with wet hands. If you have to put the
appliance, always turn it off before.
Do not touch the hot parts of the appliance when using it, there is a risk of injuries or burns.
The airflow inlet grid will automatically be hot after use. The cord supply does not touch the applian-
ce.
PRODUCT AND ACCESORIES Fig.1
1. Airflow inlet grid
2. airflow intake grid
3. Airflow concentrator
4. "Cold air" button
5. Air speed selector
6. Temperature selector
7. Handle
8. Hook
9. Cord supply
All manuals and user guides at all-guides.com
Accesories:
1 spare concentrator
1 diffuser
9
EN