Télécharger Imprimer la page

AEG SOLO 10 Guide De Démarrage Rapide page 8

Masquer les pouces Voir aussi pour SOLO 10:

Publicité

Les langues disponibles

Les langues disponibles

7
6.8
Switching the Handset On/Off
• Press and hold for more than 2 seconds to switch the handset on or off in standby mode.
> The display will show "SEARCHING... " until the handset finds the base.
Note: You can switch the handset off to save battery life, if the handset is not on the base or a charger pod
and you do not want to use it for a while.
IMPORTANT:
When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring
when there is an incoming call. To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
6.9
To Lock/Unlock the Keypad
You can lock the keypad to avoid making calls or pressing the keys accidentally.
• In standby mode, press and hold
> The handset displays "KEYS LOCKED".
• To turn the keypad lock off, press and hold
Note:
Incoming calls can still be answered even if the keypad is locked.
7
PHONEBOOK
Your phone can store up to 100 phonebook entries, which can be saved and viewed by any handset
registered to the base, although only one handset can access it at a time. Each phonebook entry can have
a maximum of 24 digits for the phone number and 12 characters for the name.
7.1
Store a Contact in the Phonebook
• From the home screen, press
• Press
again to select "PHONEBOOK".
• Press
to select "NEW ENTRY".
• Enter the name of the contact (maximum 12 characters) using the keypad.
• If you make a mistake, press
• Press
to confirm the name entry.
• Enter the number of the contact (maximum 24 digits) using the keypad.
• If you make a mistake, press
• Press
to confirm.
> A confirmation beep is played.
• Press to return to standby mode.
Note:
You cannot store a new phonebook entry when the memory is full. In this case, you have to delete existing
entries to make space for new ones. When storing the number, enter the full number including the area
code if you subscribe to caller display, otherwise it will not display the name when there is an incoming call.
7.2
Access the Phonebook
• From the home screen, press
• Press
again to select "PHONEBOOK".
• Alternatively, you can press
• Press
to "LIST" and then press
> The phonebook entries are listed in alphabetical order.
• Press
to scroll through the stored entries.
• Press
to view the details of the selected entry.
• Press to return to standby mode.
All manuals and user guides at all-guides.com
key for 3 second to lock the keypad.
again.
.
to delete the last character entered.
to delete the last number entered.
.
in standby mode to open the phonebook list.
to select.

Publicité

loading