Product Overview; Product Description; Intended Use; Symbols On The Product - Husqvarna ST 424 Manuel D'utilisation

13. Wheel (for ST 424/427/430 only)
14. Dipstick (for ST 424/427/430 only)
15. Oil fill (for ST 424/427/430 only)
16. Oil drain
17. Starter rope handle
18. Fuel ON/OFF switch (for ST 424/427/430 only)
19. Primer (for ST 424/427/430 only)
20. Continuous track (for ST 424T/427T/430T only)

Product overview

1
12
11
1. Adjustment lever for the auger bucket
2. ON/OFF switch for the heated grip
3. Hour meter and oil change reminder
4. Throttle
5. Discharge chute lever
6. Release lever
7. Ignition slot
8. Auger engagement
9. Drive speed lever
10. Symbols label
11. Remote control lever for the discharge chute
deflector
12. Drive engagement

Product description

The product is a snow thrower that is used to
remove snow from the ground.
876 - 011 - 11.05.2020
2 4
3
10
21. Auger bucket
22. Skid plate
23. Augers
24. Tool for cleaning
25. Discharge chute
26. Discharge chute deflector
27. LED light
28. Hook cover (ST 424T, ST 427T, ST 430T)
5
7

Intended use

This product can be used to remove snow from
fields, roads, walkways and driveways. Do not use it
on slopes that are greater than 20°. Do not use the
product in areas where there is much debris, dirt and
protruding stones.

Symbols on the product

Note: If the decals on the product are damaged,
contact the distributor to replace them.
Warning.
Read the operator's manual.
6
8
9
3