MSI 880GMA-E55 Serie Manuel D'instructions page 25

All manuals and user guides at all-guides.com
SVM Support
this item allows you to enable/disable the aMd SVM (Secure Virtual Machine)
technology.
aMd Cool'n'quiet
the Cool'n'quiet technology can effectively and dynamically lower CPu speed
and power consumption.
Ce Support
to enable this item to read the CPu power consumption while idle. not all porces-
sors support enhanced Halt tate (Ce).
iMPoRtant
to ensure that Cool'n'quiet function is activated and will be working properly, it is
required to double confirm that:
Run BioS Setup, and select Cell Menu. under Cell Menu, find aMd Cool'n'quiet,
*
and set this item to "enabled".
enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power op-
*
tions]. enter Power options Properties tag, and select Minimal Power Manage-
ment under Power schemes.
adjust CPu FSB Frequency (MHz)
this item allows you to select the CPu Front Side Bus clock frequency (in MHz).
oC Stepping
this item will be enabled after you set the overclocking frequency in the "adjust
CPu FSB Frequency (MHz)". and the following items will appear. this items will
help the system to overclock step by step after system booting up.
Start oC Stepping From (MHz)
this item is used to set the initial base clock. the system will boot with the initial
base clock, and start to overclock from initial base clock to set base clock that
you set in "adjust CPu FSB Frequency (MHz)" step by step.
oC Step
this item is used to set how many steps for base colck overclocking.
oC Step Count timer
this item is used to set the buffer time for every step.
adjust CPu Ratio
this item is used to adjust CPu clock multiplier (ratio). it is available only when the
processor supports this function.
adjusted CPu Frequency (MHz)
it shows the adjusted CPu frequency. Read-only.
adjust CPu-nB Ratio
this item is used to adjust CPu-nB ratio.
adjusted CPu-nB Frequency (MHz)
it shows the adjusted CPu-nB frequency. Read-only.
MS-7623
25