Jeulin Foxy 482047 Manuel D'utilisation page 5

Data logging
Foxy force sensor
Ref : 482 047
1 General
A true electronic dynamometer, this sensor allows measuring force, and in particular,
investigating weights, moment, concurrent forces, tensile and compression forces.
2 Use
This sensor has to be used with any console in the Foxy range.
2.1 Connection to the Foxy console
2.2 Commissioning
The zero must be adjusted with the sensor in position (in the upper or lower position).
The positioning depends on the anticipated use.
ENGLISH
Attaching hook
- Place the sensor opposite the console connector.
- Slide the connector following the console guide.
- Push home until it clips in.
Precision notches to
facilitate measurements
taken by hand.
4
Measurement
sensor (can be
disassembled)