Livoo DV152 Notice D'utilisation page 18

- the applications you have installed on the device,
- the trends proposed by the device
- the different pages existing in the device (Search, Home, Applications, Video, Music, Settings, weather
conditions).
To launch an application or go to a selected page, with the arrow on the remote control and press the "
OK " button.
2. PAGE « SETTINGS »
From the home screen, go to the device's "SETTINGS" page by navigating the menus located in the upper
left corner of the screen.
Wi-Fi connection
In the "SETTINGS" page, select "Network" (Fig. 8).
You will see on the right of the screen the list of available Wi-Fi networks. Select in the list the Wi-Fi
network you want to connect to.
Note: if your network does not appear, check that your internet box is activated. If your box is activated
but no network is visible, check that the "Wi-Fi" option is activated at the top of the column that appears
on the right of the screen.
If your Wi-Fi network is password protected, you will need to enter the password to connect.
When you are connected to the network of your choice, the mention "connected" appears under the
name of the network.
Input source
1. HDMI Connection
Connect your projector to another device using an HDMI cable. The HDMI port is located on the back of
your projector (Fig. 1).
In the "SETTINGS" page, select "Input Source" (Fig. 8). A column appears on the left of the screen where
you can choose "HDMI". When you confirm, you will project via the HDMI cable.
Note: you can also make the selection column appear from any projected page by using the button NO.
5 on the remote control (Fig. 3)
To exit the " HDMI " projection mode, press the " Home Page " button on the remote control (Fig. 3).
2. AV connection
Connect an AV cable to the AV port on the back of your projector (Fig. 1).
In the « SETTING page », select « input source » (Fig. 8). A column appears on the left of the screen in
which you could choose "AV". By confirming, you validate the projection source.
Note: you can also make the selection column appear from any projected page by using the button NO.
5 on the remote control (Fig. 3)
3. MEDIA connection
Plug in USB key, external hard drive or other device can be connected via USB port, which is located on
the back of your projector (Fig. 1).
In the « SETTING » page, select "input source" (Fig. 8). A column appears on the left of the screen in which
you could choose "Media" files. By confirming, you validate the projection source.
Note: you can also make the selection column appear from any projected page by using the button NO.
5 on the remote control (Fig. 3)
Software update
For an optimal function of your device, it is necessary that the software used is regularly to be updated,
in this menu, you can activate or deactivate the three options below:
www.livoo.fr
EN