Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tips and Tricks

Sock placement
Incorrect use of the Sock could result
in discomfort, potentially leading to
red marks, pressure sores or blisters
on your baby's foot. Ensure your baby
is wearing the right size Sock: you
want the Sock to fit snugly but not
tight around both toes and ankle. We
recommend you rotate the foot your
baby wears the Sock on regularly.
Where should my Base Station go?
Your Base Station must be within the
range of the Sock when it is in use by
your baby to avoid unnecessary blue
notifications. The Bluetooth range is
up to 100 feet. The Base Station is
your primary notification device in the
event of a red notification and as such
should be placed in a location where
you can hear it if it sounds.
How to test notifications
Red
Remove the sensor from the Base
Station and keep monitoring turned
on. Press and hold the Base Station
until you hear 3 beeps, then release.
Snooze the sound by pressing the
Base Station again or pressing pause
in the app. To reset, press and hold
the Base Station until the light turns
off and you hear a beep, then press to
turn back on again.
Blue
Remove the sensor from the Base
Station and keep monitoring turned
on. Holding the sensor, put as much
distance as possible between you and
the Base Station.
Yellow
Remove the sensor from the Base
Station and keep monitoring turned
on. Place Sock on baby's foot or
adult finger until you have a reading.
Remove Sock and wait. This may take
up to 60 seconds.
How to forget Wi-Fi
Via Base Station
Remove the sensor from the Base
Station. Press and hold the base
button while inserting the power cord
into the base. Hold the base button
until the base light glows orange
and you hear 4 beeps. Then tap the
base button three times. Confirm
the Wi-Fi light on the bottom of the
base is off.
21

Publicité

Table des Matières
loading

Produits Connexes pour Owlet Smart Sock

Table des Matières