Renkforce RF-4995148 Mode D'emploi page 4

Maintenance and cleaning
Never use aggressive and abrasive detergents, rubbing alcohol or other
chemical solutions, as these could damage the casing or even impair the
functioning of the product.
• You do not need to carry out maintenance work on the product. Under no
circumstances should you service any of the components in the interior of the
product, therefore never open it.
• Disconnect the product from the computer before cleaning.
• Do not immerse the product in water.
• A dry, soft and clean cloth is sufficient for cleaning the exterior. Do not press too
hard on the casing as this can lead to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage / current........................5 V/DC, max. 900 mA (via USB)
USB standard.......................................USB 3.0
Connections ......................................... 3 x USB 3.0 (USB-A port),
System requirements ......................... Windows
Operating/storage conditions ...........-10 to +65 ºC, max. 85 % RH
Dimensions (W x H x D)......................96 x 23 x 35 mm
Weight ...................................................63 g
All manuals and user guides at all-guides.com
1 x USB 3.0 (USB-A plug)
2 x 3.5 mm jack sockets (microphone mono,
speaker stereo)
2000, XP (Home, Pro, with SP1, SP2,
®
SP3, 32 bit only), Vista™ (32/64 bit),
7 (32/64 bit), 8 & 8.1 (32/64 bit), RT,
Mac OS X 10.5 to 10.10,
Linux Kernel 2.04.0 or above (Kernel 3.x)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE. V1_0815_02-DS