Belkin FireWire ExpressCard Mode D'emploi page 8

1
2
3
4
5
75028ea_F5U505ea.indb 6
Get user manuals: See SafeManuals.com
Troubleshooting
The ExpressCard and devices connected to the
computer do not work properly.
Please do the following:
1. Check that all the cables you are using are the
correct types, and that they are all securely
connected.
2. Make sure all devices are powered on and
connected to the proper power supply and source.
3. Reconnect daisy-chained devices you may have
disconnected for installation. If reconnecting does
not clear up the problem, restart your computer.
4. Make sure you have properly installed the
ExpressCard.
The computer did not detect the ExpressCard.
1. Make sure that the ExpressCard is correctly
plugged into the ExpressCard 34-/54mm slot; if
not, plug in it securely.
2. If the ExpressCard is plugged in correctly, see
if its gold connectors are clean; if not, clean the
connector surface.
3. Follow the procedure on page 5, titled "Verifying
Proper Installation". If the ExpressCard designation
"Texas Instruments OHCI Compliant IEEE 1394
Host Controller" does not appear in the Device
Manager, update your computer BIOS to the latest
version (contact your computer manufacturer for
6
14/3/06 4:45:58 pm