Ferroli TE FC I Manuel D'utilisation Et D'installation page 32

EN
3. Take terminal B out of the FCU electric control box and pass
it through the wiring hole in the rear cover of the wired control-
ler. Connect terminal B to the 5-core socket on the PCB of wired
controller. Then, restore the rear cover of wired controller and
install the wired controller into the FCU electric control box with
the display panel face-up, as shown below.
Terminal B
The wired controller can be installed on the left or right
side of FCU, depending on the circumstances.
Rear cover of
wired controller
CAUTION
11
Wired controller