2 INSTALLATION
2.1 Safety precautions
Read the safety precautions carefully before installing the
unit.
Stated below are important safety issues that must be
obeyed.
Please entrust the distributor or professionals to
install the unit. Do not install the unit by yourself.
Unauthorized uninstallation of the unit is not allowed.
The wiring should adapt to the wired controller
current.
The specified cables shall be applied in the wiring.
No external force may be applied to the terminal.
The circuit of wired controller is a low voltage circuit,
which cannot be arranged in the same wiring pipe
with strong-current cables, and the distance between
the wiring pipes should be at least more than
300~500mm.
WARNING
06