Télécharger Imprimer la page

PETLINER PET619A Manuel D'installation page 8

Publicité

Les langues disponibles

Les langues disponibles

Frequently Asked Questions:
EN
How old does the dog have to be before using the system?
Your dog should have learned basic obedience commands such as, "sit" or "stay."
Receiver might be too large for dogs under 15lbs.
Once my dog completes training and is been obeying my commands, will he
wear the collar?
Probably not, but you may try to reinforce training with the collar.
Can I use the
Petrainer
rechargeable training collar with more than one dog?
Yes, you just need to purchase another Collar Receiver for the system.
Is the Collar Receiver waterproof?
Yes, but always ensure that the Rubber Cover seals the Charging Port.
Can I replace the Collar receiver with another kind of collar?
No.
Can I attach a leash to the Collar Receiver?
No, this can result in pulling the Contact Points too tightly against the dog's neck.
leash to a separate, nonmetallic collar or a harness. Ensure the extra collar does not put
pressure on the Contact Points.
How long can I leave the Collar Receiver on my dog?
The design of the collar discourages constant wearing. We recommend not having
wear the collar for more than 12 hours out of every 24-hour period.
Is the training system suitable for all dogs?
The collar is adjustable from length 5.9" (15cm) to 19.6" (50cm), if the dog's neck
circumference is smaller than 5.9", you will be forced to rethread the collar, if the dog's neck
circumference is larger than 22", this collar may not be suitable for the dog. This collar is not
suitable for dogs under 15lbs.
The Collar
Attach a
the dog
-14-
Troubleshooting
My dog is not responding after successfully setting up the training system.
Charge the Remote Transmitter and Collar Receiver for 6 hours, separately before first
use.
Ensure the Remote Transmitter and Collar Receiver are powered on.
have to
Check the intensity levels of vibration and static shock, making sure it is not set to 0.
Ensure the Collar Receiver has sufficient power to operate.
Check the collar to ensure it fits snugly against your dog's neck.
If tested for all of the above and the dog is still not responding, please try re-pairing the
Remote Transmitter and Receiver Collar.
The Remote Transmitter does not work.
Check the battery status of the Remote Transmitter.
If the battery is low, please recharge the Remote Transmitter.
My collar-receiver works great for some time, yet it does not work after charging.
First, check if the receiver has been charged correctly. Check the "prepare the collar
receiver" part of the guide for the correct charging method.
Power on the receiver again after charging.
I want to test the Collar Receiver on myself, but it does not work.
When testing the Collar Receiver with your hands, please touch the two electrodes
simultaneously, as touching one electrode will not work.
-15-
EN

Publicité

loading