Publicité
Les langues disponibles
Les langues disponibles
EN
Note: If wanting to test the shock function on yourself, please ensure your
or hand is across both contact points to ensure the connection is complete.
Otherwise, user will feel no stimulation.
Testing the Vibration Functions
1. Ensure the Toggle Switch is in the correct position for the Collar Receiver
testing.
2. Adjust the Intensity Dial off of 100.
3. Press the Vibration Button on your Remote Transmitter.
4. If done correctly, the Collar Receiver will vibrate.
(Figure 3-1)
(Figure 3-2)
-10-
Testing the Sound Functions
1. Ensure the Toggle Switch is in the correction for the Collar Receiver you're
testing. Press the Sound Button on your Remote Transmitter.
2. If done correctly, the Collar Receiver will emit sound.
finger
Step
Assemble and Fit the Collar Receiver
you're
4
Attaching the Contact Points
In your package that you received, you will find 1 set of contact points. These
contact points are screwed onto the receiver so that the points can effectively
contact the dogs skin without hair/fur interfering with the connection.
Attaching the Collar Strap to the Collar Receiver
The Collar Receiver attaches to the Collar Strap by sliding through the
side and going wrapping around the back of the Collar Receiver. To accomplish this
correctly, please view the diagram below:
(Figure 3-3)
tabs on each
-11-
EN
Publicité
