Trotec BP25 Mode D'emploi page 5

Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with laser measuring
devices.
• have read and understood the instructions, especially the Safety
chapter.
Safety signs and labels on the device
Note
Do not remove any safety signs, stickers or labels from the device.
Keep all safety signs, stickers and labels in legible condition.
The following safety signs and labels are attached to the device:
Warning sign
Meaning The warning sign indicates that the device is equipped with a
class 2 laser.
Do not look directly into the laser beam or the opening
from which the laser beam emerges!
Residual risks
Warning of electrical voltage
There is a risk of a short-circuit due to liquids penetrating the
housing!
Do not immerse the device and the accessories in water. Make
sure that no water or other liquids can enter the housing.
Warning of electrical voltage
Work on the electrical components must only be carried out by an
authorised specialist company!
Warning of laser radiation
Laser class 2, P max.: < 1 mW, λ: 400-700 nm,
EN 60825-1:2014
Do not look directly into the laser beam or the opening from which
it emerges.
Never point the laser beam at people, animals or reflective
surfaces. Even brief eye contact can lead to eye damage.
Examining the laser output aperture by use of optical instruments
(e.g. magnifying glass, magnifiers and the like) entails the risk of
eye damage.
When working with a laser of class 2, observe the national
regulations on wearing eye protection.
EN
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may use it as a
dangerous toy.
Warning
The device is not a toy and does not belong in the hands of
children.
Warning
Dangers can occur at the device when it is used by untrained
people in an unprofessional or improper way! Observe the
personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to extreme
temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the device.
Disposal
Always dispose of packing materials in an environmentally friendly manner
and in accordance with the applicable local disposal regulations.
The icon with the crossed-out waste bin on waste electrical or electronic
equipment is taken from Directive 2012/19/EU. It states that this device must
not be disposed of with the household waste at the end of its life. You will find
collection points for free return of waste electrical and electronic equipment in
your vicinity. The addresses can be obtained from your municipality or local
administration. You can also find out about other return options that apply for
many EU countries on the website https://hub.trotec.com/?id=45090.
Otherwise, please contact an official recycling centre for electronic and
electrical equipment authorised for your country.
The separate collection of waste electrical and electronic equipment aims to
enable the re-use, recycling and other forms of recovery of waste equipment
as well as to prevent negative effects for the environment and human health
caused by the disposal of hazardous substances potentially contained in the
equipment.
In the European Union, batteries and accumulators must not be treated
as domestic waste, but must be disposed of professionally in accordance with
Directive 2006/66/EC of the European Parliament and of the Council of
6 September 2006 on batteries and accumulators. Please dispose of batteries
and accumulators according to the relevant legal requirements.
Only for United Kingdom
According to Waste Electrical and Electronic Equipment Regulations 2013
(SI 2013/3113) (as amended) and the Waste Batteries and Accumulators
Regulations 2009 (SI 2009/890) (as amended), devices that are no longer
usable must be collected separately and disposed of in an environmentally
friendly manner.
Pyrometer BP25 5