Panasonic TY-LA2004 Guide De Remplacement page 5

All manuals and user guides at all-guides.com
ENGLISH
Procedure for installing new lamp (cont.)
• Replace the Lamp unit and cover
screws.
• Tighten the lamp unit cover screw with
a screwdriver (make sure it is screwed
tight).
Notes:
• Properly dispose of old lamp.
• Attach the lamp unit and lamp
unit housing door securely. If
the lamp unit housing door is
not attached securely, the pro-
tective circuit will be activated
and the lamp will not turn on.
• Replace the front cover.
Front Cover
• Plug the power cord back into the wall
outlet.
• Press Power button to turn set on.
Note: Whenever the lamp cover is
removed the set will shut down.
Resetting the counter
After replacing lamp, please make sure to
perform the procedure below in order to
reset the lamp lifetime counter.
Procedure
• Press down both VOLUME DOWN
button on the unit and MUTE button
on the Remote Control at the same
time for 3 seconds.
Temp Lamp
Lamp LED
Power LED
VOL Down
MUTE button on remote
• When successful, the 2 LED's on the
front of the unit (Power and Lamp) will
flash for 5 seconds.
Note: If LED's do not flash, repeat the
procedure above.
5
POWER
VOL
CH
TV/VIDEO