Publicité
Les langues disponibles
Les langues disponibles
W
C50 IN
INEMASTER
2.4 INSTALLING THE DUCTS
The connections must be sealed to prevent condensation forming on the walls of the air-conditioner.
Place the inside duct on the flue
collar
Position the insulation duct then the
ring clamp.
2.5 INSTALLING THE WATER FLUE
Screw the bend, supplied with the
equipment, on the right side of the
device.
Important : Wait for 24 hours before switching the air-conditioner on.
USER GUIDE
Stick the adhesive tape across the
flue collar and the duct.
Close the head of the ring clamp after
tightening it manually.
Slide on the PVC tubing.
If necessary seal the threads with Teflon
Take it round several times to ensure
a good seal.
Screw up the ring clamp and repeat
the operation on the other flue collar.
Connect the free end of the PVC
tubing to a wastewater point or
retention tank. Avoid "counter-slopes"
or "siphons".
O
2006
CTOBER
Page 28
Publicité
