PNI Echo One Manuel Utilisateur page 3

TECHNICAL SPECIFICATIONS
• Supply voltage: 5V
• Idle current: 6 mA
• Operating current: 56 mA
• Distortion ~ 3.72% (according to the microphone capsule)
• Supported files: MP3, WAV
• Audio file length: 1.5 sec. (firmware V1.0)
COPY MP3 FILE TO ECHO AND ROGER BEEP MODULE
Copy an MP3 / WAV file to the Echo and Roger Beep module following the steps below:
Note: the module is factory connected.
• Connect the microphone to the CB radio and turn on the CB radio.
• Switch the button on the module to the Open position.
• Connect a USB - Micro USB data cable between the PC (laptop) and the echo
module.
• Delete the existing file and copy the new file.
• To disconnect, safely remove the module ("Eject" or "Safely remove mass storage").
• Disconnect the USB cable - Micro USB.
• Switch back the button on the module to the Close position.
Caution: Do not transmit with the CB radio while the module is connected to the computer
via a micro USB cable.
TECHNICAL CHARACTERISTICS OF THE AUDIO FILE
• Length max. 1.5 seconds
• Transmission speed 8- 320Kbps
• MP3 / WAV file type
• Medium volume level.
3
EN