HQ Power HQWS10001 Mode D'emploi page 6

The radio will scan through the available channels. All the channels will be shown in
alphabetical order.
Manual DAB Tuning
Select [Manual Tune] to manually tune the radio.
Use the tuning/enter dial to tune the radio in and press the same dial to keep the
current tuning. Save as a preset if required. This helps in getting a clearer signal in
areas where signal is poor.
DRC (Dynamic Range Compression)
This function enables to even out the audio by raising the volume of quieter audio levels
and lowering the volume of louder audio levels. Select [DRC] in the menu options.
The low option will give you a small amount of DRC, where the high option gives you a
strong amount. Use the tuning/enter dial to tune the radio in. Then, press the same dial
to select the required preference. The asterisk in the top right corner indicates the
current selection.
Prune
It is possible to remove DAB stations listed with a [?] by using the prune function.
Select the station you wish to remove and select [Prune] from the menu options. Select
[Yes] to confirm.
5.4 FM Mode
Selecting the FM Mode
Press the mode button to change from DAB to FM radio.
Auto Tune FM
To autotune the next available radio station, press the scan button once.
The scan will always stop at the next signal received. Save a preset if required.
V. 01 – 27/03/2020
HQWS10001
6 ©Velleman nv