HQ Power HQWS10001 Mode D'emploi page 12

Setting the Alarm
Cycle to the option by using the tuning/enter dial and press the same dial to select it.
Once an option has been selected it will move on to the next value to set until the
process is complete.
Process flow:
Once the alarm has been successfully set, [Alarm Saved] will be displayed to confirm.
When the radio is in standby, you can see which alarm has been set with the icons on
the right of the display.
Switching the Alarm On/Off
Go through the procedure to set the alarm and change the [Alarm] option to [On] or
[Off].
6. Care and Maintenance
Cleaning
•
Before starting any cleaning or maintenance activities, unplug the appliance from its
power source and let it cool down.
•
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a
soap and water solution. Do not immerse or submerge any part of the appliance in
water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
Maintenance
•
All repairs should only be carried out by qualified service personnel. Do not open
exterior casing of the appliance. There are no user-serviceable parts inside. Opening
or visible attempts to open or repair the appliance may void any guarantee and/or
cause damage to the product or personal injury.
Storage
•
Store the appliance and its accessories in a clean and dry area.
V. 01 – 27/03/2020
HQWS10001
Duration
* If [DAB] or [FM] is selected
* If [Once] is selected
Alarm 1 Setup → Alarm 2 Setup
Alarm
Hour → Minutes
Time
15 → 30 → 45 → 60 → 90 minutes
Buzz → *DAB → *FM
Alert
Last Listened → Preset 1-10
Daily → *Once → Weekday → Weekend
Repeat
Day → Month → Year
Volume Select Volume Level
On → Off
Alarm
12 ©Velleman nv