Technical Specs; Product Features; What's In The Box - BluMill Treadmill HSM-T09D5 Mode D'emploi

TECHNICAL SPECS

EN
Product Dimensions 126 x 60 x 120 cm
(Unfolded)
Product Dimensions 120 x 60 x 68 cm
(Folded)
Max User Weight 110 kg
CE Certified
LCD Display Speed, Time, Distance, Calories,Pulse

PRODUCT FEATURES

•
Model: HSM-T09D5
•
User Manual
•
Handrests with padded foam
•
Hand Pulse
•
Running surface 100*34CM
•
Speed range: 1-10KM/H
•
12 pre-set programs / 1 manual
•
4 Speed Quick Start Keys
•
Fitshow APP
•
iPad Holder
•
2 Water Bottle Holders

WHAT'S IN THE BOX

Remove the treadmill and other components from the packaging – save the packaging
until you have fully assembled and tested the treadmill. Note, returns must be returned in
the original packaging for safety reasons.
If any of the components are missing, damaged in transit or simply don't work, please
contact the Customer Care team immediately for further instructions. Note, do not try to
resolve any issues yourself as this could lead to further damage or injury.
Treadmill Frame
6
Motor Power 735 W
Rated Voltage/ 220-240 V 50 /
Frequency 60 Hz
Machine Weight 24 kg
•
Safety Key (emergency stop)
•
Manual Incline(3 levels)
•
Transport wheels
•
Easy to Use Control Pad displaying
Speed, Time, Distance, Calories, Pulse
and Pre-set Programs
Handrests, Control Pad Tool Kit
and iPad Holder
TOOL KIT
•
Allen Key x 1
•
Lubricant x 1
•
Safety Key (emergency stop) x 1
•
Decorative Handrest Cover x 2
•
Safety Locks (to fold and unfold) x 2
•
Control Pad Locks x 2
ASSEMBLY INSTRUCTIONS
5 easy steps to assemble your treadmill then you're ready to workout.
borgpen
Screw the safety lock in
place to keep the frame
upright and secure.
Screw off bolts/washers on two stand co-
lumns ,fix the handrests and Control Pad onto
the stand columns, using the bolts/washers
to fix and place the decorative covers over
the bolts.
Connect the Control Pad signal cable (A) to
the signal cable on the frame (B).
Place the Treadmill
frame on the ground,
pull the spring cotter to
open the frame upright.
Screw off the small silver bolt on the back-
side of control panel. Mounting the control
panel Align the control panel and iPad Holder
with two black screws, screwing in place
tightly by hand. WARNING - Internal wire, do
not rotate the control panel!
EN
7