Publicité
Les langues disponibles
Les langues disponibles
level over the total working period.
Iden fy
safety measures to protect the operator from the effects of vibra
the tool and the accessories, keep the hands warm, organisa
APPLICATION
This tool is intended for drilling in wood, metal, ceramic and plas
are devoted to con
the technical performance and design concept of products may vary without any prior
for any possible incurrence of inconvenience therefrom. Read and follow the opera ng instru ons and
safety informa
efore using for the firs
WARNING
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Read all
safety warnings and all instruc
Failure to follow the warnings and instruc
shock, fire and/or serious injury. Make sure the voltage corresponds to the type label on the unit. Packing
materials are no toys! Children must not play with plas
output may exceed 85dB(A) at the workplace. In this instance, wear ear prot
GENERAL SAFETY
Read all safety warnings and all ins
electric shock, fire and/or serious injury.
Save all warnings and ins
for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or ba ery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Clu ered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while opera
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet c
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When opera
a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If opera
a power tool in a damp loca
protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when opera
a power tool while you are red or under the influence of drugs, alcohol or medica
ina en
ra
ower tools may result in serious personal injury.
b) Use personal prot
ve equipment. Always wear eye prot
2
such as: maintain
work pa erns.
well as for screwdriving.
improving and perfec
g the exis
products. Therefore,
ave this manual.
may result in electric
ger of suffoca
The power tool noise
Failure to follow the warnings and ins
a power tool. Distr
can cause you to lose
Water entering a power tool will increase the risk
is unavoidable, use a residual current device (RCD)
a power tool. Do not use
. A moment of
Protec ve equipment such as dust
GB
mask, non-skid safety shoes, hard hat, or hearing prot
personal injuries.
c) Prevent uninten
source and/or ba ery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjus
to a rota
e) Do not overreach. Keep proper f
power tool in unexpected situa
our apology
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the c
connected and properly used. Use of dust c
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your applica
will do the job be er and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the
power source and/or the ba ery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preven ve safety measures reduce the risk of st
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these ins
may result in
users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other c
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cu
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instruc ons, taking into
account the working c
Use of the power tool for opera
5) Service
a) Have your power tool serviced by a qualified repair person using only iden cal replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR ELECTRIC DRILL
• Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them
before you start working
• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool
• Maxpro can assure fla
• Use only accessories with an allowable speed matching at least the highest no-load speed of the tool
• This tool should not be used by people under the age of 16 years
• Use completely unrolled and safe extension cords with a capacity of 16 Amps (U.K. 13 Amps)
• Always keep the cord away from moving parts of the tool
• If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect
the plug
• Never use the tool when cord is damaged; have it replaced by a qualified person
• If the drill bit becomes unexpectedly jammed (causing a sudden, dangerous r
switch off the tool
• In case of electrical or mechanic
• Secure the work piece (a work piece clamped with clamping devices or in a vice is held more securely
than by hand)
st
g. Ensure the switch is in the off-
key or wrench before turning the power tool on. A wrench or a key le a ached
ower tool may result in personal injury.
g and balance at all
of dust extr
can reduce dust-related hazards.
to operate the power tool. Power tools are dangerous in the hands of untrained
that may affect the power tool's opera
tools sharp and clean. Properly maintained cu
work to be performed.
fferent from those intended could result in a hazardous situa
tool only when original accessories are used
ately switch off the tool and disconnect the plug
GB
used for appropriate c
s will reduce
before c
g to power
. This enables be er control of the
and c
f
ensure these are
The correct power tool
the power
If damaged, have the power tool repaired
tools with sharp cu
edges are less
immediately
3
Publicité
