iolair M2AABW Mode D'emploi page 7

OSD (On-Screen Display) Menu Mode
Press the OSD button to access menu, and press Increase / Decrease button for adjustment.
BRIGHTNESS
*
BRIGHTNESS
CONTRAST
PHASE
CLOCK
H-POSITION
V-POSITION
RESET
COLOR TEMPERATURE
RED
GREEN
BLUE
LANGUAGE
MISCELLANEOUS
EXIT OSD
MISCELLANEOUS
RETURN
OSD H-POSITION
OSD V-POSITION
OSD DURATION
AUTO COLOR
VOLUME
SOURCE
*
*
Notice: Source is optional feature.
Adjust the brightness of the display.
IBT (Light Sensor)-(Optional): This feature automatically adjust your
monitor brightness base on ambient light changes. To activate this feature
please select Auto icon within the main OSD Brightness icon.
To deactivate please select Manual instead of Auto.
Adjust the difference between light and dark area.
The phase of the dot clock is adjusted.
The ratio of dividing frequency of the dot clock is adjusted.
Adjust the horizontal position of the display.
Adjust the vertical position of display.
Recall the default setting.
Adjust the color temperature.
Adjust the Red color temperature.
Adjust the Green color temperature.
Adjust the Blue color temperature.
Select the display language of the OSD Menu.
〝No〞will take you to the exit menu.〝Yes〞will bring you to the sub menus
of the Miscellaneous menu.
Saving and Leave.
Return to main menu.
Adjust the horizontal position of the OSD.
Adjust the vertical position of the OSD.
Adjust the timing of the OSD menu.
Adjust the color automatically.
Increase or decrease the sound volume.
Select input Video source
:
VGA or DVI
5