HuntMax H8WIFI-BT Mode D'emploi page 11

The OFF mode is the safe mode when any actions
OFF
need to be taken (e.g. Replacing the micro SD card
mode
or batteries, or transporting the device).
In the TEST mode, you can check and change the settings
TEST
of the camera by using its built-in LCD screen. You can
mode
The camera will take photos or videos automatically
ON
(with its current settings) when it is triggered by the
mode
PIR sensor's detection of activity in the area it monitors.
● Press the UP key, then press the SHOT to take a video.
Press the SHOT button again to stop recording.
● Press the DOWN key, then press the SHOT to take photo.
● Press the MENU key, the setup options will be showing
on the LCD screen.
● Press the UP/DOWN key, scroll to the next or previous
parameter.
● Press the RIGHT/LEFT key to change the setting.
● Press the OK key to save the new setting.
● Press the MENU key to exit the setup menu.
● Press the PLAY key to enter image review mode.
NOTE
*
After setting the parameters to your preferences, be sure to move
the switch to ON mode to begin actually taking photos or videos.
*
Please remove the protective foil from the camera before use for
not affecting the camera effect.
Three basic operation modes
Operation in TEST Mode
Camera Operation
9