ASSEMBLY :
Unpack the heater and accessories.
A. Turn the convector
B. Place the two feets and tighten the screws
C. Turn the
convector to the upright position
TECHNICAL SPECIFICATIONS
Model N° :
THCVT001T
Description : Silver portable Turbo convection
heater
Voltage :
230V~ 50Hz
CLASS 1
This product conforms to the requirements set by directives 2014/35/EC (repealing directive
73/23/EEC amended by directive 93/68/EEC) and 2014/30/EC (repealing directive 89/336/EEC)
OPERATING:
PRECAUTIONS FOR USE
1. Before using this appliance, ensure that it is placed on a flat, stable surface.
2. Place the heater at least 90cm from the wall, furniture or curtains.
3. Check that the voltage corresponds to that of the power supply (230v mains socket)
4. Leave the heater to cool and unplug it before moving it, and use the handle to move it.
USING THE HEATER
1. The switches control the thermostat and power selection should be on the OFF position, connect
the radiator to the socket.
2. Switch on the heater on one of the following positions:
- Press the switch (I): 800 W
- Press the switch (II): 1200 W
- Press the switch (I + II): 2000 W
- Press the "turbo" switch to activate the fan.
3. The power switch will illuminate when the heater is operating.
4. The ambient temperature can be set by the thermostat. Turn the thermostat knob in the direction
of clockwise to increase the temperature, or counterclockwise to decrease, until the desired
temperature.
5. After reached the desired temperature, to maintain the temperature: turn the thermostat knob
counterclockwise
until the light turns off. The desired temperature will be kept constant by the
thermostat function.
6. When not using this heater, return the 2 switches to their initial position: "0" and "MIN", and then
unplug it.
7. The heating system has a protection device against overheating.
8. Do not cover or place any object on the radiator during operation.
upside-down
Power (mode I)
Power (mode II)
Power (mode I +
II)
800 W
1 200 W
2 000 W
GB-6