Crosley CT100A Manuel D'utilisation page 5

English
Radio Operation
1. Set the Function Switch to RADIO position
2. Set the Band Switch to FM, AM, SW1, or SW2 position.
3. Rotate the Tuning Knob for desired radio station.
Note:
 When operating FM and SW band radio, pull up the TELESCOPIC ANTENNA, and
adjust position to get better reception.
 SW1 and SW2 are shortwave radio bands.
Cassette Operation
1. Set the Function Switch to TAPE position.
2. Insert the prerecorded cassette into the cassette tray, and press the Play
button.
3. To fast forward, press the Fast Forward button in. To stop fast forwarding and
return to the playback mode, press the Play button.
4. To rewind, press the Rewind button in. To stop rewinding and return to the
playback mode, press the Play button.
5. To stop the playback, press the Stop/Eject button once. To eject the cassette,
press the Stop/Eject button again.
Note: Remove the cassette from the cassette holder when it is not in use.
Cassette Recording
MICROPHONE to TAPE
1. Set the Function Switch to TAPE position
2. Insert a cassette tape, and press the RECORD button to record the sounds
through the microphone.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
3. To pause recoding, press the Pause button.
4. To stop recording, press the Stop/Eject button.
5