Heating selector
Upper heat elements are selected for broiling.
Lower heat elements are selected for grilling.
Both upper and down heat elements are selected for bake or toast.
Upper heating with convection function on.
Lower heating with convection function on.
Upper and lower heating with convection function on.
Starting to use the appliance
1.
Take the electric Oven and all accessories from the packaging.
Danger of contusion!
When opening and closing the door, do not place your fingers/hand
between the door hinges. They could be crushed.
2.
Before using the appliance for the first time, it and all of the accessories
must be cleaned free of possible packaging residues. Clean the
accessories with a hand warm and mild detergent solution and then dry
them ab.
3.
Wipe the appliance housing with a cloth lightly moistened with water and
then dry it carefully.
4.
When the appliance is completely dry inside and out, insert the plug into a
suitable power socket (220 - 240 V~/50 Hz).
5.
Now switch the appliance on, without the accessories and without
foodstuffs. Leave the appliance door completely open.
6.
Select the setting 230° C with the temperature control switch. Place the
main function switch to upper and lower heat.
7.
Place the timer switch at 15 minutes.
The appliance allows itself to be switched on with the timer switch. As
soon as the time switch is set the control lamp glows.
As the heating elements are lightly greased, a slight smell may occur
when first putting them into operation. This is harmless and stops after
a short time. Open a window and provide for sufficient ventilation.
Instructions Manual
English
4