FOCUSEAT U-AH0008R30A4ATG Mode D'emploi page 4

FOCUSEAT Assembly Instructions
1. Insert chair wheels into chair
base by pressing the stud
firmly into the hole on the
bottom of the base.
3
2. Install the gas lift and gas lift
cover into the top of the chair
base by placing the larger end
into the hole in the center of the
chair base.
Place the gas lift cover over the
gas lift with the larger opening
facing down.
3. Place completed chair base
assembly to the side.
4. Mechanism assembly.
A. Remove the four screws from the seat cushion bottom using
L Shape Wrench provided.
B. In bottom of the mechanism, it is engraved with a arrow showing
the "front" of the unit that needs to be installed facing the
front of the chair.
C.Using the four screws from the seat cushion bottom attach the
mechanism to the seat cushion. Install the handles and push
them to the bottom.
Height
adjustment
4