Ener-G+ HEA-21545 Guide D'utilisation page 2

CONTENT
1. Assembly
2. Operation
3. For your safety
4. Cleaning and storage
5. Specifications
6. Grounding instructions
7. Warranty
FRANÇAIS
Please empty the packing box thoroughly, and make sure that there are no missing parts.
MAKE SURE THERE IS NO DAMAGE TO THE UNIT AND POWER CORD.
IF THERE IS ANY DAMAGE OR
2. ASSEMBLY
Step 1: Using the wall mount bracket as a template
mark the four holes where you plan to install the
radiator. Drill four holes into the wall and hammer the
supplied four M6*50 expansion screws into the wall.
Step 2:
Unscrew the four nuts, spring locks washers and plain
washers from the four expansion screws. Keep them for
the next step.
Please read instructions carefully before assembly
Veuillez lire attentivement les instructions avant l'assemblage
Retain this manual for reference
Conservez ce manuel pour référence
1-3
3-4
4
5
5
5
5
6
IF THERE ARE MISSING PARTS, PLEASE CONTACT
Wall mounted: Brick or Concrete
1-866-967-7333 ext 227.
Step 3:
Fix the mounting bracket over the four expansion
screws.
Step 4:
Tighten the four nuts, spring locks washers and plain
washers with the M6 spanner.
1