sunjoe SPX2100HH-SJG Manuel D'utilisation page 11

Maintenance
m
CAUTION! Before working on the pressure washer,
disconnect the plug from the power supply socket.
1. To ensure good performance, check and clean the water
inlet filter (Fig. 13).
Fig. 13
2. Remove the filter and rinse with warm water to prevent
any foreign matter from clogging the pump (Fig. 14).
Fig. 14
3. Clean the nozzle with the needle clean-out tool provided
(Fig. 15). Remove the stainless steel lance from the gun;
remove any dirt from the nozzle hole and rinse.
Fig. 15
4. Remove additional debris by back flushing water through
the nozzle and extension lance. To do this, place the end
of your garden hose (with water running) to the tip of the
nozzle, pushing water and debris out of the back opening
of the nozzle and extension lance.
Disposal
Recycling the Washer
• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
• When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal free of charge.
Service + Support
If your Sun Joe SPX2100HH-SJG electric pressure washer
®
requires service or maintenance, please call the Snow Joe
Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S P X 2 1 0 0 H H - S J G
11
Serial #:
+
®