Télécharger Imprimer la page

Samsung Freestyle Guide De L'utilisateur page 4

Publicité

Les langues disponibles

Les langues disponibles

Providing proper ventilation for your Projector
When you install your Projector, maintain a distance
of at least 4 inches (10 cm) between the Projector
and other objects (walls, cabinet sides, etc.) to
ensure proper ventilation. Failing to maintain proper
ventilation may result in a fire or a problem with
the product caused by an increase in its internal
temperature.
Operation
• Move the product by holding the body. Do not hold
the Lens Cap.
• This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal or
recycling information.
• Store the accessories (remote control, or etc.) in a
location safely out of the reach of children.
• When you need to turn off the Projector
completely, wait until the fan stops completely so
that the Projector can cool down completely.
• Do not dispose of remote control or batteries in
a fire.
• Do not short-circuit, disassemble, or overheat the
batteries.
English - 4
All manuals and user guides at all-guidesbox.com
• CAUTION: There is danger of an explosion if you
• WARNING - TO PREVENT THE SPREAD
• Do not drop or strike the product. If the product is
Caring for the Projector
• To clean this apparatus, unplug the power cord
• The exterior of the Projector can get scratched
• Do not spray water or any liquid directly onto the
replace the batteries used in the remote with the
wrong type of battery. Replace only with the same
or equivalent type.
OF FIRE, KEEP CANDLES AND OTHER
ITEMS WITH OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
damaged, disconnect the power cord and contact a
Samsung service center.
from the wall outlet and wipe the product with
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergents. These
chemicals can damage the appearance of the
Projector or erase the printing on the product.
during cleaning. Be sure to wipe the exterior
carefully using a soft cloth to prevent scratches.
Projector. Any liquid that goes into the product may
cause a failure, fire, or electric shock.

Publicité

loading

Ce manuel est également adapté pour:

Sp-lsp3bla