Front panel commands
There are two possibilities to serve wine by the glass:
- By pressing on the
button: and the wine comes out continuously until you
release the button.
- By pressing on the
button: a dose of 20 ml comes out automatically. By
pressing 2 times, 40ml, pressing 3 times 60ml etc ... you do not have to stay pressed,
just press the number of times wanted. The unit takes about 1 to 2 seconds to get the
wine out.
It is possible to change the value of a dose; the factory setting is 20ml. Press the
arrow
until the "H2" symbol is displayed and flashes. Use the
and
arrows to
adjust your flow.
Setting the temperature
To adjust the temperature between 4 and 18°C, press the key temperature setting
when the H1 code is displayed, tap and hold until the temperature flashes. Then
adjust the temperature by using the arrows to lower press
. If instead you want to
increase the set temperature press
until the desired temperature. The
temperature setting is now complete.
Lighting
Turn on / off the LED lighting by pressing the corresponding LED
.
23