Publicité
Les langues disponibles
Les langues disponibles
(4)The button
is disabled without pressing
two LED mode: ①Stay on mode, displaying symbol "
"
". Press
automatically returns to the temperature display after 15 seconds.
（5）Press and hold
to restore all output.
（6） press
and
seconds, the display should be returned to the original layout automatically. Press SET to chack humidity of
the other zone.
4.1.3 Alarm explanation
"Door open" alarm:
ring three times every 30 seconds. Buzzer will stop automatically after 3 minutes.
"Invalidation of carbon filter" alarm: When the carbon filter is disabled,
ring. Change the carbon filter and press
when pressing
.
4.1.4 Humidity alarm display
When the relative humidity values less than 50% more than 72hours, the display symol "
flashes. The symol should lifting flash until the humidity is greater than 50%.
4.1.5 Operating faults
Temperature:
will flash when the temperature excess the limit between -30
every 10 seconds until pressing
Hot and cold circuits:
10 seconds until pressing
All manuals and user guides at all-guides.com
. Press
to choose LED mode, then press
for 5 seconds, all output will be cut off including the display and LED. Gently press
together at sametime, humidity values will be displayed on the display panel, after 5
will flash when door is open for more then 15 minutes and your will hear the buzzer
for 5 seconds, then the life of new carbon filter will display
Humidity Sensor
or
will flash when there is fault about hot and cold circuits, buzzer will ring every
or
.
18
and hold down for 5 seconds to display the
" ②When door opens, displaying symbol
when confirm. Otherwise the display
will flash and the buzzer will
0
0
C and 60
C. Buzzer will ring
" will
Publicité
