Publicité
Les langues disponibles
Les langues disponibles
3.8 The installation of the wall separate screws
When the back side of cheese cellar placed against the wall, should need to install the wall separate screws.
As shown, the wall separate screws were installed in the flange on both sides of compressors pallet.
4.1 Control and adjustment
4.1.1 Control panel description
4.1.2 Temperature settings
(1) Upon temperature zone on the display broad with the symbol "
on the display broad with the symbol "
(2) Press
, the display start to flash, then press
again that the display (flashing) display other zone set temperature, then press
temperature of another zone. 8 seconds if no operation, display board will display real-time temperature.
(3)The button
is disabled without pressing
life of carbon filter (unit: day). Otherwise the display automatically returns to the temperature display after 15
seconds.
Note: Don't press
All manuals and user guides at all-guides.com
" indicates.
when displaying the life of carbon filter, or the number of life will be disordered.
" indicates, under temperature zone
or
to adjust temperature of one zone. Press
. Press
and hold down for 5 seconds to display the
17
or
to adjust
Publicité
