Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL
REMOTE CONTROL
1.
Mode
2.
Cool: Blue LED lights when in cooling mode.
Yellow LED lights when in
Fan: Green LED lights when in fan mode.
Heat: Red LED lights when in heat mode (applies only to
heat and cool modes).
Fan Speeds
3.
There are three adjustable speeds in the cool and fan
and room temperature is greater than 77° F, fan speed can
4.
To set the timer for a 1- 24-hour delay until the air
1. When you use the timer setting button while the unit is
2. When you use the timer setting button while the unit is
on standby, you can preset a time for the unit to turn on.
3. If you press the "ON/OFF" button, the preset timer
function will be canceled.
4. Timer setting range is 1-24 hours.
To clear Timer Delay program:
NOTE:
1. Press the Timer Button.
2. Press and hold the minus button until the timer display
has cleared.
To change the remaining time (in hours):
1. Press the Timer Button.
2. Press the plus or minus button to change the delay time
from 1 to 24 hours.
3. The new delay time will display.
Setting the Temperature
5.
To set the temperature, press the
lower the temperature. The temperature can be raised
or lowered in the cool mode. The temperature cannot be
NOTE; The temperature can be set between 61° F to 89° F
(Cool Mode) and 61° F to 77° F (Heat Mode) .
or
keys to raise or
8
1
3
4
5
2
Publicité
