Next Level Racing F-GT Elite NLRE019 Manuel D'instructions page 8

support@nextlevelracing.com
Line up pre-drilled holes on the 40x40 extrusion with the holes on the bracket previously installed in
04
step 03B, bolt through and secure with a nut.
05
Slide 2 x T-nut into the bottom channel of the extrusion
PARTS:
1 X 40X40 EXTRUSION
2 X M8 WASHER
2 X 65MM M8 BOLT
2 X M8 NUT
TIPS:
The aluminium extrusion has 2
pre-drilled holes
PARTS:
2 X T-NUT