Best Buy Easy Home DVB-T Nano Flip HD Manuel D'utilisation page 25

All manuals and user guides at all-guides.com
// User Manual
Easy Home DVB-T Nano Flip HD
5.6 OSD Setting
When you enter the OSD setting menu, the following screen appears:
1. OSD timeout: Sets the time information messages about a channel will ap-
pear on screen, and that they appear every time the channel is changed.
2. OSD transparency: Configures the level of transparency of the OSD messages.
5.7 Audio Description Setting
This option allows to set up the audio description function, which can be used
when it is included on the broadcasting.
5.8 PVR Storage Information
This option will format the USB storage disk (Yellow button) with FAT or NTFS
formats. You can also select (Blue button) if you want to use the disk for recor-
ding function, Timeshift or Recording and Timeshift (REC & TMS).
5.9 PVR Setting
In this option you can enable or disable the availability of Timeshift function. You
can also change the time interval jumps (Jump) that are available pressing the FF
/ RR while playing a recording, enable the option to switch from Timeshift to re-
cording (you can use it pressing the REC button during a Timeshift), choice bet-
ween PS recording (MPEG2) or TS (record the entire signal) modes.
5.10 Other
This section contains the following options:
Auto Standby
The STB will be automatically switched into standby mode after three hours in
active mode following the last user interaction and/ or a channel change,an alert
message will show 2 minutes before going into standby mode.
LNB Power
Here you can enable or disable the power to the external antenna.
25