Publicité
Les langues disponibles
Les langues disponibles
OPERATION
MAKING A CALL
Calls may be initiated from your mobile phone or directly from the BT1000 using voice-
dial commands. Note: Voice-dial feature must be supported by your mobile phone.
MAKING CALLS FROM YOUR MOBILE PHONE
Dial directly from your mobile phone. The call is automatically connected to the BT1000.
RECEIVING A CALL
The BT1000 will signal an incoming call with the announcement "Call from (Name or
Number)". Press the MFB once on the BT1000 to answer the call.
ENDING A CALL
During the call press the MFB to end the call. The BT1000 will announce "End call".
REJECTING A CALL
To reject an incoming call press and hold the MFB for 3 seconds The BT1000 will
announce "Reject call Successful".
MAKING A CALL USING VOICE DIAL
Note: Make sure your mobile phone is voice-dial enabled. In Standby mode, short press
the MFB. When you hear a beep, say the voice tag. Important: Make sure to record a
voice tag before using the voice-dial function. This function is only applicable to mobile
phones with Bluetooth Hands-Free Profile. Functionality varies depending on the mobile
phone model. Please refer to your mobile phone's user guide for additional information.
ADJUSTING THE VOLUME (ACTIVE CALL)
To Increase: Press the volume button "V+" to increase the volume by one level. Repeat
until desired level is reached.
To Decrease: Press the volume button "V-" to decrease the volume by one level. Repeat
until desired level is reached.
TEXT-TO-SPEECH VOLUME (BT1000 CALLER ID ANNOUNCE)
To Increase: In standby mode press the volume button "V+" to increase the volume by
one level. Repeat until desired level is reached.
To Decrease: In standby mode press the volume button "V-" to decrease the volume by
one level. Repeat until desired level is reached.
ANSWERING OR REJECTING A SECOND CALL
To Answer: During a call with a second incoming call, short press the MFB to answer the
second call and put the first call on hold.
To Reject: During a call with a second incoming call, press the MFB for 3 seconds to
reject the second call.
SWAPPING CALLS
1. During a three-way call, press the MFB for 3 seconds to swap the call.
2. During a three-way call, short press the MFB to end the current call and automatically
switch to one of the other calls.
TEXT-TO-SPEECH LANGUAGE OPTIONS
Press and hold the "V+" button for 3 seconds and the BT1000 will announce "Select
language". Repeat the process to select the desired language in the following order:
English, French, Italian, German & Spanish.
7
Publicité
