Installation - VINCENT PF-2 Manuel D'utilisation

On the digital ports (4) You can connect up to two digital source devices (CD players, DVD players, etc.).
Therefore connect the Vincent PF-2 via power cord with your desired source device.
Recommended on / off sequence
Switch on:
First switch on the power filter, then the connected devices
Turn off:
First switch off the connected devices, then the power filter
PF-2
CONNECTING AN ANALOG SOURCE
At the analogue ports (3) up to four analogue source devices (amplifier, preamplifier, and amplifier) can
be connected. Therefore, connect the Vincent PF-2 via power cord with your desired source device.
PF-2
Check, if the power supply is suitable for the device
at your home. Required voltage and frequency can
be read on the rear panel next to the power socket.
If the power supply is suitable, press the IEC connec-
Vincent
16

INSTALLATION

CONNECTING A DIGITAL SOURCE
CONNECTING THE POWER CORD
Power cable
Power cable
tor of the supplied power cord into the AC socket on
the rear panel. Connect the other end of the power
cord into an AC outlet.
CD-player,
DVD-player, etc.
preamplifier,
amplifier, etc.