Conceptronic EMRICK03G Guide Rapide page 2

English
Turn Off the power to your computer.

Unplug the power cord and remove your computer's cover.

Remove the slot bracket from an available PCIe slot.

To install the card, carefully align the card's bus connector with the

selected PCIe slot on the motherboard. Push the board down firmly.
Replace the slot bracket's holding screw to secure the card.

Replace the computer cover and reconnect the power cord.

Your computer will show the "New Hardware Wizard" on your screen.
You can ignore this "New Hardware Wizard" by clicking "Cancel".
Insert the CD-ROM in the optical drive of your computer. The

AutoPlay option will be shown automatically. Click on "Run Autorun.exe"
to start the autorun menu.
Select "Install Drivers" and follow the onscreen instructions to install

the required driversfor the serial PCIe card.
When the driver installation is complete, restart your computer to

ensure the drivers are correctly loaded.
Conceptronic EMRICK03G
Installation & usage