Clean Air Optima Ambiente AD-301 Mode D'emploi page 8

3. Topple the device and drain the water from the air inlet.
On/Off
Switch
4. Put the product in a dry place and let it air dry for 24 hours.
Maintenance
Clean the product in the following way after 5 to 6 times or 3 to 5 days of use:
1. Switch off and unplug the power cord, remove the cover.
2. Pour all water out of the water tank and clean it.
3. Cleaning the atomizer plate: Use a cotton stick to clean the surface of the atomizer plate
with diluted neutral detergent, then rinse with clean water.
4. Cleaning the splash board hole and the mist outlet: pull out the splash board.
Use a cotton stick to clean the surface and the holes with diluted neutral detergent, then
rinse with clean water.
5. Use soft cloth to clean the surface of the product, do not use a medical diluent, phenethyl
alcohol and so on, otherwise it will discolor the device.
6. If you are not going to use the device for a long time: unplug the power cord, empty the
water tank, clean the device as described, dry it thoroughly and store it in a dry place.
8
Step 1
Outlet micro-fine and flavored mist
Air inlet water
draining hole
Step 2
Splash board hole