EN
Installation size : you can adjustment the gate degree according to these numbers
1) "C" value is 139mm
2) "D" can be measured from the gate easily
3) "A" = "C" + "D"
4) The value of "B" can be calculated from the value of "A" and the leaves opening angle.
Ex. If "A" =160mm with the leaves opening angle of 100 degrees, then the value of "B" is approximate 190mm
NOTE: Please make sure " B" and "A" are similar or the same in value that the leaves can be operated smoothly.
Also to reduce the burden of the motor.
12