PNI SH121 Manuel Utilisateur page 6

» The switch is installed and connected
correctly, but the touch button does not work.
First make sure that the wires are connected
correctly and that the bulb is not burned out.
1. Cut off the power for 1 minute.
2. Restart the power supply.
3. Wait 10 seconds and then touch the buttons
to operate the switch.
Compatible lamps or bulbs
Compatible lamps or bulbs: LED, incandescent,
halogen, economical, fluorescent or with
electronic driver.
Note: The switch does not work with fluorescent
(neon) lamps with magnetic inductance ballast.
User manual - 6