Danfoss CF-WR Instruction page 6

Instruction
Activate CF-WR Wireless Relay:
• Press the PROG button . The PROG LED flashes during communication.
• If installation succeeded: The PROG LED turns off.
• If installation fails: The PROG LED flashes 5 times. Repeat the installation
procedure.
3. Configuration
Configuration of CF-WR Wireless Relay is made with the CF-RC Remote Con-
troller.
Please refer to the instruction for CF-RC for further information.
4. Uninstallation / Factory Reset
1. Disconnect CF-WR Wireless Relay from the power supply.
2. Press and hold the PROG button .
3. While pressing the PROG button , reconnect the power supply.
4. Release the PROG button , when the PROG LED first turns on and then off.
6 Danfoss Heating Solutions
CF-WR Electronic Wireless Relay
VISPP21C © Danfoss 11/2011