Bastilipo Ventisca Manuel D'instructions page 6

Head Assembly
STEP1:Unscrew the 4 lock screw on the
face of the fan housing, handle the rear grill
to the motor housing by matching its 4
screw hole to the 4 screw hole on the front
motor housing, then screw the lock screw
to lock the rear grill and the front motor
housing.
STEP2:Insert the motor shaft into the fan
blade by matching the motor shaft spindle
to the D-shaped cut-out on fan blade, then
screw the lock screw.
STEP3:Center the front grill, aligning the
logo, so it is horlzontal and parallel to the
floor, place onto the rear grill, and snap in
place. Secure by tightening the grill button
screw at the bottom of the rear grill.
Pole Assembly
Unscrew the screw in locking shaft at the
bottom of fan housing, insert upper
extension pole to the locking shaft with the
right hole position。
Using the screws to screw the tube on the
supportor board.
Care and storage
1. Turn the control to OFF and UNPLUG
THE FAN BEFORE CLEANING.
2. Use only a soft damp cloth to clean the
fan.
3. DO NOT immerse the fan in water and
never allow water to drip into the motor
housing.
4. Do not use gasoline, paint thinner or
other chemicals to clean the fan.
5. Store the fan in its original box or cover
the fan to protect it from dust. Store it in a
cool dry place.
Correct disposal of this product
• This marking indicates that this product
should not be disposed with other
household wastes throughout the EU.
• To prevent possible harm to the
environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable
reuse of material resources.
• To return your used device, please use
the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
• The symbol on the product
means that at the end of its
life, the appliance must not be
considered normal waste
but hazardous waste and, as such,
must be disposed of in specific recovery
and disposal areas, as prescribed by the
EC Directive 2012/19/EU (WEEE). By
disposing of this product correctly, you can
prevent negative consequences for the
environment and for human health, due to
the presence of potentially hazardous
substances in the product.
Warranty
• This warranty covers malfunctions for 36
months. To be valid, it must be accompanied
by a copy of the original invoice or ticket. The
application of the guarantee starts from the
date of purchase. During the time that the
faulty device is being repaired, no damages
will be paid. The company is not responsible
for any damage that an appliance may cause
to external elements. Please keep the
appliance packaging for the warranty period.
Compañía Pineda Álvarez S.L.
Address: P.I. Sta Isabel c/Alicatadores, 23
Spain
+34 955 741 038
+34 615 264 338