Powr-Flite PV030-W12-U Manuel D'exploitation Et D'entretien page 8

ASSEMBLING THE VACUUM
Nozzle Cloth bag
Power Cord
Handle
Important Note
Under no circumstances should you plug in the vacuum cleaner prior to complete
assembly.
The vacuum cleaner handle is packed as a separate component that requires
assembly.
Installing the Handle
1. Release the handle bracket from the handle tube by removing the
two screws
(Fig. 1).
2. Place handle onto the handle tube, aligning holes with pegs
(Fig. 2).
3. Place the handle bracket back into position
(Fig. 3).
4. Secure with two screws removed in step 1.
Fig. 1 Fig. 2
8