Publicité
Les langues disponibles
Les langues disponibles
HOW TO
Reset the Circuit Breaker
Your vacuum features a circuit breaker to
protect the machine against damage due to a
surge in the electrical current. Electrical surging
can be a result of, though not limited to, a
jammed brushroll (i.e. vacuuming up a throw
rug) or a jammed motor fan.
Should your vacuum cleaner experience a
jammed brushroll with the circuit breaker
tripping, first press the on/off button to the
off position and unplug the unit. Inspect the
Circuit Breaker Reset button
brushroll by removing the bottom plate (see
Fig. 16
"How to Remove Bottom Plate") and remove
any debris which may be causing the jam.
Reinstall the bottom plate (see "How to Install
Bottom Plate"), reset the circuit breaker by
pressing the Circuit Breaker Reset Button
, plug in power cord, and turn unit on.
(Fig. 16)
If the unit fails to turn on, return to the place
where you purchased your unit for assistance.
14
Publicité
