BWT P-GM Serie Notice D'installation Et Conseils D'utilisation page 13

4. Assembly
4.1. Standard skimmer only: Assembling the skimmer mouth
Start by cleaning the two mating surfaces (mouth and extension
throat).
Fasten the skimmer mouth to the panel using screws (6).
Apply glue to the mating surfaces of the skimmer mouth and
extension throat (refer to the instructions enclosed with the pot of
glue).
Position the skimmer body against the skimmer mouth.
Fasten the body to the skimmer mouth using four M5x60 screws.
4.2. Liner/ membrane waterproof seal
Ref. Description
7 Gasket
8 Flange
9 Pozidrive countersunk screw ST 5.5x 25
10 Flange trim
4.3. Installation of the skimmer weir
CONSTRUCTION & RENOVATION
Fasten with 4 screws
Qty
2
1
24
1
13 2021/08 - Indice de révision : A - Code : 25150