Télécharger Imprimer la page

Impecca DVHP-9109 Manuel De L'utilisateur page 8

Publicité

Les langues disponibles

Les langues disponibles

BASIC DVD PLAYER OPERATION
BEFORE YOU BEGIN
Turn on your TV. Select the appropriate video input settings to correspond to the input used when connecting to
the DVD player. Refer to the "Connections" section of this manual.
If you have connected the player to an audio system (stereo or amplifier) turn on your audio system and select
the appropriate audio input settings to correspond to the input used when connecting to the DVD player.
Note: As TV and/or audio systems vary, please refer to your TV or Audio system user's manual.
PLAY
1. Press the POWER button on the DVD player or press the Power/Standby button on the DVD remote control.
2. Press OPEN/CLOSE button (on the DVD player or remote control) to open the disc tray.
3. Hold the edge of the disc and place it in the tray with the label side up.
4. Press OPEN/CLOSE button (on the DVD player or remote control) again to close the disc tray.
The DVD player starts playback or opens the DVD disc menu automatically. Use the directional buttons and the
ENTER button to navigate the DVD's menu screen. If the DVD does not automatically begin playing, press PLAY
(on the DVD player or remote control).
Note: The auto-load sequence of each DVD, CD, VCD disc may vary according to format and/or the way the disc
was authored. Some DVDs will auto-play a series of previews, copyright notices, or advertisements before load-
ing the Menu screen. Certain buttons on the remote control, such as the MENU, TITLE, F.RWD, F.FWD, PREV, NEXT,
and GOTO buttons, may be automatically disabled until the auto-load sequence is completed.
PAUSE
To pause, press the PLAY/PAUSE button once during playback. To resume, press the PLAY/PAUSE button again.
FORWARD/REVERSE SCAN
Press REV or FWD during playback.
To increase the Fast Forward or Rewind speed, press the REV or FWD button again to choose the desired speed
(Normal, x2, x4, x8, x16, x32)
SKIP NEXT/PREVIOUS
You can skip to a specific chapter or track during playback.
Skipping Ahead - Press NEXT during playback.
You will advance to the next chapter/track each time you press the NEXT button.
Skipping Back - Press PREV during playback.
If you press the PREV button midway through a chapter, the DVD player returns to the beginning
of the chapter. The player then skips a chapter each time you press the PREV button.
STOP
This DVD player has a "Last Played" memory feature. When you press stop, it will retain the position so that you
can resume play from this point, even after turning the DVD player off.
Press STOP once to stop and hold playback at the current position. Pressing Play will resume play from
the current position.
Press STOP twice to completely stop and reset the disc to the beginning. The "Last Played" feature will
not be activated.
8

Publicité

loading