Télécharger Imprimer la page

IB RUBINETTI 312 Notice De Montage page 3

Partie extérieure
Masquer les pouces Voir aussi pour 312:

Publicité

Les langues disponibles

Les langues disponibles

EN
TECHNICAL DATA
Minimum dynamic pressure: 0.5 bar
Maximum operational pressure: 5 bar
Recommended operational pressure: 1-5 bar
It's recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature: 80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In order to get your device work correctly and fine in time, must ensure compliance
with the mode of installation and maintenance described in this booklet. Relying on
a qualified plumber. Make sure that the system is free from all debris and impurities
existing.
INSTALLATION
ATTENTION: The instructions are valid for the different models of spout and handle; the
assembly is always the same.
Fig. 1: Unscrew the screws from the carter and remove it. Unscrew the cover. Unscrew
the screws and remove the flat cover. ATTENTION: do not throw the 4 screws, you will
need them.
Fig. 2 - 3: Position the cartridge lock in the built-in body, being careful to center the rear
plug. Fit the cartridge lock by tightening the four screws.
After completing the installation of the cartridge lock and spout, turn on the stopcocks
and check that the mixer tap unit operates correctly. Keep the tap pressurised for a few
minutes checking eventual leaks.
Fig. 4: Insert the plate on the cartridge lock.
Fig. 5: Screw the cover ring onto the cartridge lock. Insert the handle on the cartridge
rod, fixing it with the grub screw. Position the cover hole plug.
Fig. 6: Engage the handle on the diverter rod, fixing it with the grain. Position the cover
hole plug.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water,
rewash and dry them with a soft towel and deerskin. Avoid the usage of alcohol, solvents,
solid or liquid detergents which contain corrosive or acidic substances, abrasive
sponges, swab with metallic strings because they could irreversibly compromise the
surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER
EXCLUDE IB RUBINETTERIE FROM ANY WARRANTY OBLIGATION.

Publicité

loading