Publicité
Les langues disponibles
Les langues disponibles
5 | attachments
As these are attachments for use by professionals, we would ask you to handle them
with care as they can cause injury when used incorrectly. Particular caution is advised
at higher speeds.
the following attachments are provided with your appliance:
a - sapphire cone
removal of dry skin or calluses from the soles of the feet and from
the heels and for manicuring the nails.
b – felt cone
Smoothing and polishing the edge of the nail after filling as well as
for cleaning the nail surface. Always polish in circular movements
and do not allow the felt cone to rest in one place, otherwise
friction could cause heat to develop.
c – sapphire disk, fine
filling and treatment of the nails, fine grained sapphire disk. the
specific aspect of this sapphire disk is that only the inner disk
rotates, while the outer support is stationary. this enables precise
filing of the nails without the risk of burning the skin with the fast
rotating disk.
d – sapphire callus rasp
for rapid removal of stubborn calluses and hard skin on the soles of
feet and heels. this attachment can be used on large areas.
e – cylindrical milling cutter
grinding of lignified foot nail surfaces as well as smoothing of
these. for this purpose, apply the milling cutter horizontally to
the nail surface and remove the unwanted layer of nail using slow
circular movements.
f – flame milling cutter
for removing ingrown nails. carefully guide the flame cutter up to
the part to be treated and remove parts of the nail as neccessary.
g – sapphire milling cutter, round
this accessory attachment is for careful removal of corns. when
using this attachment, please remember when removing the layer
of skin from the corn that you will quickly penetrate deeper into
the skin and this could injure the periosteum.
25
Publicité
